|
Home
-> G-Clips -> How
to Install -> Dimensions
-> Video
 Attach
Grating to steel structures.
Model
GG-1A
Available in galvanized, 316-stainless, aluminum, and CuNi.
Fastens grating to a horizontal-facing
steel structural member edge.
The model GG- describes an assembly
of fastener parts identical but for materials of construction,
that each contain three common parts. First is a G-Clips unique
top for better holding strength and to suit 19W4 grating. Second,
a G-Clips patented bottom connects to the beam underside. A hex-headed
cap screw connects the two, and its length suits the grating height
being installed.
Varieties of Model GG meet
specific needs:
|
Image
|
Model Name
|
Purpose
|
|
|
Model
GG |
Attach 19 space grating to
steel members with horizontal edges.
|
|
|
Model
WSSGG |
Attach
grating to steel members with horizontal edges in selected
corrosive environments.
SS= 316 Stainless steel.
|
 |
Model SSGC
"Close-Grip"
|
Attach
narrow-mesh grating (as small as 3/8") to structural
members.
|
 |
Model
GN-1
"Narrow Grip" |
Attach
15-space grating to structures with horizontal edges. |
 |
Model
GG-0
"Short-Grip" |
Fits
1" tall grating and minimal thickness beam edge.
GG-0 also may fit 3/4" tall grating and 1/4" beam
edges (Samples are offered to confirm
in each case of 3/4" grating and any beam thickness).
|
|
|
Model
FSSGG |
Fiberglass:
Attach I-6000 pultruded grating to steel members. SS=
316 SS.
|
 |
Model
FSSGF |
Fiberglass:
Attach I-6000 pultruded fiberglass grating to fiberglass structural
members.
SS= 316 SS.
|
 |
Model
XSSGG |
Fiberglass:
Model XSSGG features a rectangular top and a G-Clip bottom
to fit odd-spaced grating, with 3/4" or 1" slots.
SS= 316 SS.
|
 |
Model
YSSGG |
Fiberglass:
Model YSSGG uses a square top and G-Clip bottom to fit 1.5"
square-mesh fiberglass grating.
SS= 316 SS.
|
 |
Model
ZSSGG |
Fiberglass:
Model ZSSGG uses a square top and G-Clip bottom to fit 2"
square-mesh fiberglass grating.
SS= 316 SS.
|
|
|
Model
GT-R |
Attach grating
to steel members with horizontal edges. Round top for odd-spaced
grating bar setups.
|
|
|
Model
SSGT-R |
Attach grating to steel members
with horizontal edges. Round top for odd-spaced grating
bar setups.
SS= 316 Stainless
steel.
|
Generous quantities
of popular sizes are usually in stock and can be shipped same
day if ordered before 2:00 p.m. CST.
Sizing Chart:
|
Grating
Thickness
|
Structural
Member Flange Thickness
|
|
|
1/4"
to 3/4"
GG-1
|
3/4"
to 1-1/4"
GG-2
|
1-1/4"
to 1-3/4"
GG-3
|
1-3/4"
to 2-1/4"
GG-4
|
|
1
inch = A
|
GG-1A
|
GG-2A
|
GG-3A
|
GG-4A
|
|
1-1/4
inch = B
|
GG-1B
|
GG-2B
|
GG-3B
|
GG-4B
|
|
1-1/2
inch = C
|
GG-1C
|
GG-2C
|
GG-3C
|
GG-4C
|
|
1-3/4
inch = D
|
GG-1D
|
GG-2D
|
GG-3D
|
GG-4D
|
|
2
inch = E
|
GG-1E
|
GG-2E
|
GG-3E
|
GG-4E
|
Other sizes are available
from stock. Please call toll-free (800) 227-9013 or please
consult us via email at sales@gclips.com. Please
type
'Attn: Technical Question' in the subject line.'
Top of page.
|
